Payment & Shipping Terms:
|Process:||Semi-Casting & Hot Rolling||Sample:||Availiable|
|Chemical Composition:||Magnesium Alloy||Keyword:||Magnesium Alloy Bar|
AZ91 Magnesium Rod,
CE Magnesium Rod,
Industry Round Magnesium Alloy Bar
Good Process Performance ZK60-T5 Magnesium Rod Good Electrical And Thermal Conductivity
Characteristics of Magnesium Alloy
(1) Light weight: The specific strength of magnesium alloy is higher than that of aluminum alloy and steel/iron, but slightly lower than that of fiber-reinforced plastics with the highest specific strength; its specific stiffness is equivalent to that of aluminum alloy and steel/iron, but Much higher than fiber reinforced plastics.
(2) High damping, shock-absorbing and shock-absorbing properties: Magnesium alloy has an excellent ability to absorb energy, absorb vibration and noise, and ensure that the equipment can work quietly. .
(3) Good impact resistance and compression resistance: its impact resistance is 20 times that of plastic; when magnesium alloy castings are impacted, the scars on the surface are much smaller than those of iron and aluminum.
(4) Good casting performance: Under the condition of maintaining a good component structure, the wall thickness of magnesium alloy casting products can be less than 0.6 mm, which cannot be achieved by plastic products under the same strength conditions, even aluminum alloy products can only be used in Only in the range of 1.2 to 1.5 mm can it be comparable to magnesium products.
Magnesium alloy is an alloy composed of magnesium and other elements. Its characteristics are: low density, high specific strength, large elastic modulus, good shock absorption, greater impact load capacity than aluminum alloy, and good corrosion resistance. The main alloying elements are aluminum, zinc, manganese, cerium, thorium and a small amount of zirconium or cadmium. Magnesium-aluminum alloys are the most widely used, followed by magnesium-manganese alloys and magnesium-zinc-zirconium alloys.
Magnesium alloy has the lightest specific gravity among all structural alloys, so it can reduce the weight of aluminum or iron parts without reducing the strength of the parts. The specific strength of magnesium alloy is significantly higher than that of aluminum alloy and steel, and the specific stiffness is equivalent to that of aluminum alloy and steel. In the elastic range, when the magnesium alloy is subjected to an impact load, the energy absorbed is greater than that of the aluminum alloy, so the magnesium alloy has good shock resistance and noise reduction performance. Under the same load, the damping performance is 100 times that of aluminum and 300-500 times that of titanium alloy. Good electromagnetic shielding, the casing of 3C products (mobile phone and computer) should be able to provide superior anti-electromagnetic protection, and the magnesium alloy casing can completely absorb electromagnetic interference with a frequency exceeding 100db. Good texture, the appearance and touch texture of magnesium alloy are excellent, which makes the product more luxurious, and it is not easy to corrode in the air.
Magnesium Alloy Chemical Composition:
|Alloy Element||Type||Chemical Composition%||Other elements b|
Compared with traditional magnesium alloy, Semi-continuous casting has higher strength and extensibility on its organization and composition.
1. Magnesium liquid pouring directly from the holding furnace and making it rapidly crystallization by pipetting and twice refining with high purity and less impurity. it can improve the compactness of the inner metallurgical structure of magnesium rod and make its a more reasonably inner densification crystallization. And the physical nature is greatly enhanced comparing to the traditional casting products.
2. The impurities in rhyolite even tends to zero in the molding product. semi continuous casting magnesium alloy adopts new inert gas protection device, which greatly reducing the amount of entrapped slag and improving the product quality . in the traditional process , the smelting process is completely exposed to the air, which can only inflaming retarding by rholite etc.
3. The surface is smooth and clean, no porosity, no shrinkage, no slag inclusion.
4. The length is flexible. Its existing maximum diameter is Φ600mm. it can be peeled, cut as customized. In addition, we also can produce other different specification product to meet customers’requirement. Various of specifications of magnesium ally flat bar can be semi continuous cast.
Magnesium Alloy bar Picture show:
|magnesium alloy||AZ31B||Casting round bar billet(Φ3-160*3000)||According to the requirements of sawing and heat treatment|
Magnesium Alloy Chemical composition:
|Alloy Element||Type||Chemical Composition%||Other elements b|
Advantage of Hilbo company:
Full range of product types, Ensure production capacity
We ave advanced die-casting, extrusion, forging, rolling, casting processing production line and precision testing equipment. Can produce a variety of types of magnesium alloy and magnesium alloy products, and developed a high-strength magnesium alloy extruded sheet. Through the purification of ordinary magnesium, magnesium can be raised up to 99.99% of high purity.
Magnesium alloy casting production can customized as your requirement. the technical process is great, extrusion production required for a variety of bar, no need to purchase from abroad, extrusion molding products is easy molding, low energy consumption, saving production costs.
Product technology advantages
Engaged in magnesium smelting technology personnel with more than 15 years experience, from the selection of primary materials to smelting processing has a wealth of experience and mature management techniques.
We are in magnesium ingots, magnesium alloy extrusion products have technical research and development capabilities. We are come out in front in the Magnesium alloy production enterprises
1. Small order quantity available
2. Professional engineering team and sales team
3. Payment: T/T & Western Union
4. OEM/ODM Supporttable
5. Free samples provided
6. Competitive price and high quality
We have attained ISO9001 and ISO14001 certificates, Standardize and improve the enterprise quality management system.
Contact Person: Miss. Emily shi
Tel: +86 13714725615